[Date Prev][Date Next][Thread Prev][Thread Next][Minivend by date
][Minivend by thread
]
Re: [ic] Install Problem
Don't assume Interchange is running unless you do a "ps ax". Ask me
now I know. :-( If you have a config problem it is possible for
Interchange to die without any error messages echoed to the console.
Bob
On Fri, 13 Oct 2000, Tom Compton wrote:
> I am not asking questions without having spent a lot of time on the
> documentation.
>
> Interchange and construct both run (and at the same time) but don't
> communicate. I believe the problem has to do with the configuration
> of the link between them. But since I don't have a clue as to how
> this link is supposed to work, I don't know where to start on the
> problem. Perhaps there is a place in the documentation where this is
> explained or maybe someone can point me to the place in the source
> that does this or maybe explain, conceptually, how the link between
> the programs is supposed to work.
>
> As you suggested:
> [interch@zeus interchange]$ bin/restart
> Killing Interchange server 19280 with TERM.
> Low traffic settings.
> Calling UI....
> ...UI is loaded....
> Interchange V4.5.7
> Configuring catalog construct...Using default DBM database.
> done.
> Interchange server started in INET and UNIX mode(s) (process id 20540)
>
> [interch@zeus interchange]$ ps aux
> interch 20544 0.0 0.3 1164 416 pts/0 S 21:32 0:00 grep
> interchange
> interch 20566 0.0 0.2 1164 344 ? S 21:37 0:00
> construc
>
> "We're sorry, the Interchange server is unavailable...
> We are out of service or may be experiencing high system demand,
> please try again soon. "
>
>
>
> ----- Original Message -----
> From: Ryan Hertz <rhertz@gyb.baits.com>
> To: <interchange-users@minivend.com>
> Sent: Friday, October 13, 2000 7:01 PM
> Subject: Re: [ic] Install Problem
>
>
> > At 03:48 PM 10/13/00 , you wrote:
> > >Thanks for the comment.
> > >
> > >Located vlink and changed to:
> > >[-rwsr-xr-x 1 interch interch 7732 Oct 9 11:41 tlink
> > >-rw-r--r-- 1 root root 12364 Oct 9 11:41 tlink.c
> > >-rwsr-xr-x 1 interch interch 7732 Oct 9 11:41
> > >tlink.localhost.7786
> > >-rw-r--r-- 1 root root 4232 Oct 9 11:41 tlink.pl
> > >-rwsr-xr-x 1 interch interch 7316 Oct 9 11:41 vlink
> > >-rwsr-xr-x 1 interch interch 7316 Oct 9 11:41
> > >vlink._var_run_interchange_socket
> > >-rw-r--r-- 1 root root 10889 Oct 9 11:41 vlink.c
> > >-rw-r--r-- 1 root root 3709 Oct 9 11:41 vlink.pl
> >
> > That looks like it is in the source area -- you didn't really need
> to
> > change those.
> >
> >
> > >Tried several changes to construct and this is how it is now (in
> > >cgi-bin directory):
> > >-rwsr-xr-x 1 interch interch 7316 Oct 9 11:48 construct
> >
> > Much better.
> >
> >
> > >I still recieve the error message "We're sorry . . . "
> >
> > Okay, HOW do you know that the interchange server is running? ;-)
> > Try ps -aux | grep interchange
> >
> > If you only see a result of 'grep interchange' than you need to
> > start/restart the interchange server. (install
> directory)/bin/restart
> >
> > And with the utmost honesty, you should take a serious review of the
> > documentation.
> >
> >
> >
> > Ryan Hertz tel
> 800-645-BAIT
> > Webmaster fax
> 520-645-2588
> > Advertising Director
> http://yamamoto.baits.com
> > Gary Yamamoto Custom Baits, Inc.
> http://www.insideline.net
> >
> >
> > _______________________________________________
> > Interchange-users mailing list
> > Interchange-users@www.minivend.com
> > http://www.minivend.com/mailman/listinfo/interchange-users
> >
>
>
> _______________________________________________
> Interchange-users mailing list
> Interchange-users@www.minivend.com
> http://www.minivend.com/mailman/listinfo/interchange-users
>
_______________________________________________
Interchange-users mailing list
Interchange-users@www.minivend.com
http://www.minivend.com/mailman/listinfo/interchange-users
