[ic] Error using links

Tue, 02 Jan 2001 21:56:18 -0500

--=====================_2290373==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hello,
My interchange server is started "The Interchange server is already running 
(process id 6390)" but i don't have any files and directories in my cgi-bin 
derectory but i did creat them when i run makecat.
Only construct derectory that i have is in my www.

Thank you again
Lamine

At 19:30 2001-01-02 -0600, you wrote:
>Hello,
>
>if I go with -rwxr-xr-x (for the 'construct' file in the cgi-bin) I get 
>the following:
>
>
>We're sorry, the Interchange server is unavailable...
>
>
>
>...this means the file in cgi-bin is working with -rwxr-xr-x.  You need to
>start the server now.  From the home directory for the username which owns
>Interchange:
>interchange/bin/interchange -start -u
>
>(the -u is for unix mode, you can omit it if you plan to run in inet mode).
>
>I did this logged in as the user that created 'interchange' and the 
>Interchange server started. I was able to browse the catalog and add items 
>too my cart, however, when I hit checkout I get a 500 Error. I'll be 
>working on this tomorrow.
>
>I can not say enough how helpful Ed LaFrance was in helping get me to this 
>point. (He supplied all of the above information I sure did not figure it 
>out on my own)
>Thank-you Ed!!
>
>Best regards, Chris
>----- Original Message -----
>From: <mailto:lamine@secan.net>Lamine Ndiaye
>To: 
><mailto:interchange-users@lists.akopia.com>interchange-users@lists.akopia.com
>Sent: Tuesday, January 02, 2001 7:15 PM
>Subject: RE: [ic] Error using links
>
>Hi,
>I'm a new interchange user. I have some problem to configure my 
>interchange website. I have the same problem than you. All links don't 
>work. http://www.secan.net/cgi-bin/construct/index.html
>Can you tell me how  did you solve the problem. I applied the solution 
>proposed but it doesn't work.
>
>"Since the bad old days of MV3, whenever I have encountered this, it has 
>been an issue of the cgi-bin link file permissions. Telnet into your 
>server and check the perm's on the link file for your catalog. If they 
>look like this:
>-rwxr-xr-x
>try this command at the prompt:
>chmod u+s filename
>...substitute the name of your link file for filename. Conversely, if the 
>permissions look like this:
>-rwsr-xr-x
>try this command at the prompt:
>chmod u-s filename
>Most of the time this will solve the problem.
>- Ed L.
>
>"
>
>At 09:56 2001-01-02 -0800, you wrote:
>>Hi...
>>
>>I tried this, but to no avail.  In fact, just for testing, I chmod 777'ed it
>>as well as +s.  Still nothing. Anything else to try?  Anyone?
>>
>>Thanks.
>>
>>Jason
>>
>>RE:
>>
>>-----
>>
>>Since the bad old days of MV3, whenever I have encountered this, it has
>>been an issue of the cgi-bin link file permissions.  Telnet into your
>>server and check the perm's on the link file for your catalog. If they look
>>like this:
>>
>>-rwxr-xr-x
>>
>>try this command at the prompt:
>>
>>chmod u+s filename
>>
>>...substitute the name of your link file for filename.  Conversely, if the
>>permissions look like this:
>>
>>-rwsr-xr-x
>>
>>try this command at the prompt:
>>
>>chmod u-s filename
>>
>>Most of the time this will solve the problem.
>>
>>- Ed L.
>>
>>-----
>>
>>
>>
>>_______________________________________________
>>Interchange-users mailing list
>>Interchange-users@lists.akopia.com
>>http://lists.akopia.com/mailman/listinfo/interchange-users

--=====================_2290373==_.ALT
Content-Type: text/html; charset="us-ascii"

Hello,

My interchange server is started "The
Interchange server is already running (process id 6390)" but
i don't have any files and directories in my cgi-bin derectory but i did
creat them when i run makecat.

Only construct derectory that i have is in
my www.

Thank you again

Lamine

At 19:30 2001-01-02 -0600, you wrote:

Hello,

if I go with -rwxr-xr-x (for the 'construct' file in the cgi-bin) I get
the following:

We're sorry, the Interchange server is
unavailable...

...this means the file in cgi-bin is working with -rwxr-xr-x.  You
need to 

start the server now.  From the home directory for the username
which owns 

Interchange:

interchange/bin/interchange -start -u

(the -u is for unix mode, you can omit it if you plan to run in inet
mode).

I did this logged in as the user that created 'interchange' and the
Interchange server started. I was able to browse the catalog and add
items too my cart, however, when I hit checkout I get a 500 Error. I'll
be working on this tomorrow.

I can not say enough how helpful Ed LaFrance was in helping get me to
this point. (He supplied all of the above information I sure did not
figure it out on my own)

Thank-you Ed!!

Best regards, Chris

----- Original Message ----- 
From: Lamine Ndiaye 
To:
interchange-users@lists.akopia.com 
Sent: Tuesday, January 02, 2001 7:15 PM
Subject: RE: [ic] Error using links

Hi,
I'm a new interchange user. I have some problem to configure my interchange website. I have the same problem than you. All links don't work. http://www.secan.net/cgi-bin/construct/index.html
Can you tell me how  did you solve the problem. I applied the solution proposed but it doesn't work.

"Since the bad old days of MV3, whenever I have encountered this, it has been an issue of the cgi-bin link file permissions. Telnet into your server and check the perm's on the link file for your catalog. If they look like this:
-rwxr-xr-x
try this command at the prompt:
chmod u+s filename
...substitute the name of your link file for filename. Conversely, if the permissions look like this:
-rwsr-xr-x
try this command at the prompt:
chmod u-s filename
Most of the time this will solve the problem.
- Ed L.

"

At 09:56 2001-01-02 -0800, you wrote:
Hi...

I tried this, but to no avail.  In fact, just for testing, I chmod 777'ed it
as well as +s.  Still nothing. Anything else to try?  Anyone?

Thanks.

Jason

RE:

-----

Since the bad old days of MV3, whenever I have encountered this, it has
been an issue of the cgi-bin link file permissions.  Telnet into your
server and check the perm's on the link file for your catalog. If they look
like this:

-rwxr-xr-x

try this command at the prompt:

chmod u+s filename

...substitute the name of your link file for filename.  Conversely, if the
permissions look like this:

-rwsr-xr-x

try this command at the prompt:

chmod u-s filename

Most of the time this will solve the problem.

- Ed L.

-----

_______________________________________________
Interchange-users mailing list
Interchange-users@lists.akopia.com
http://lists.akopia.com/mailman/listinfo/interchange-users

--=====================_2290373==_.ALT--