[ic] matrix options problems
Mike Heins
interchange-users@icdevgroup.org
Fri May 2 11:57:00 2003
Quoting Jim Boyer (boyerj@wsu.edu):
> > >Quoting Jim Boyer (boyerj@wsu.edu):
> > >> I am trying to get matrix options working with sku's in the products
> > >> database. I have read and read and tried many different variations, but
> > >> nothing seems to work. Here is my last attempt in modifying the options
> > >> table. I turned the table sideways to fit in the email. The first
> part is
> > >> the IC setup that works with it's own code. The second I change the
> code
> > >> field to point to a sku in the products table. The first one works
> fine,
> > >> but when I change the codes I do not get a select list. These are
> the only
> > >> fields that are not empty in the options table.
> > >>
> > >> I have read that people have got this working, but I am sure missing
> > >> something here. I am running with RH 7.3, MySQL 3.23.54, IC 4.9.7, perl
> > >> 5.6.1 .
> > >
> > >
> > >Suggest you change your "options" table to match the 4.9.7 ones from
> > >foundation, and add the "variant" table. Then add a field "option_type"
> > >in the products table, and put in catalog.cfg:
> > >
> > >
> > > OptionsEnable option_type
> > >
> > >
> > >At that point the UI should work well for the Matrix type.
> > >
> > >
> > >It would be good to update to the latest 4.9.7 from nightly_build,
> > >too.
> > >
> >
>
> >I am afraid I don't know what you mean by that. If you mean that it
> >won't order a variant, you also need to change the ProductFiles
> >setting to "products variants", and I did forget to mention that.
> >
> >This sometimes is in catalog.cfg and sometimes in etc/after.cfg in the
> >foundation. If you have a stock foundation with the "tools" sample
> >data, you would just change "options" to "variants" in etc/after.cfg.
>
> I am using a tool demo store created with the nightly build of
> 4/30/03. The etc/after.cfg has
> ProductFiles products variants
> and
> OptionsEnable option_type
>
> I have added four items to the product table for testing. The problem is
> when I setup my tables as I showed in the previous message, IC translates
> the item from
> MG0014 to MG0014-M-MG0014.
>
> MG0014-M is my master item that MG0014 - MG0016 are supposed to be options
> relating to it. MG0014-M as well as MG0014 - MG0016 are all in the
> products table.
>
> Where am I going wrong in getting the options to return the correct product
> number when I choose from the select list.
>
You can't just create arbitrary part numbers with that option type
unless you get it precisely right and you make sure you set the
display_type field in options to "one".
Can you look at the os28066 example in foundation/products/variants.txt and
foundation/products/options.txt and emulate that?
--
Mike Heins
Perusion -- Expert Interchange Consulting http://www.perusion.com/
phone +1.513.523.7621 <mike@perusion.com>
"Even if you're on the right track, you'll get run over if you just
sit there." -- Will Rogers