[ic] Additional shipping calculation based on @@TOTAL@@

[Peter]

On 09/13/2006 06:12 AM, Bruno Cantieni wrote:
>> -----Original Message-----
>> From: interchange-users-bounces at icdevgroup.org 
>> [mailto:interchange-users-bounces at icdevgroup.org] On Behalf Of Peter
>> Sent: September 12, 2006 5:22 PM
>> To: interchange-users at icdevgroup.org
>> Subject: Re: [ic] Additional shipping calculation based on @@TOTAL@@
>>
>> On 09/12/2006 06:28 AM, Bruno Cantieni wrote:
>>> Hi all.
>>> I have a shipping method where I want the "Additional 
>> shipping calculation"
>>> (padding) to be based on the total shipping weight.
>>> The method is basically plain UPS ground, internal lookup 
>> with the  "Total"
>>> criteria set to "Weight".
>>> I expected the following to work:
>>> int((@@TOTAL@@/35)+0.5)*10
>>> Alas, @@TOTAL@@ in this case is actually the raw shipping 
>> cost before
>>> padding, i.e. simply putting @@TOTAL@@ into the "Additional shipping
>>> calculation" field effectively doubles the shipping cost :(
>>> I'm curious if I misunderstand the @@TOTAL@@ usage?
>>> I expected @@TOTAL@@ to be the shipping weight given the 
>> above setup.

You didn't but with adder @@TOTAL@@ works differently.  Try using
@@CRIT@@ instead.

>>> In the meantime, replacing the above formula with 
>> int(([weight]/35)+0.5)*10
>>> actually works as expected (I diddled my Ship.pm to 
>> interpolate ITL in
>>> adder).

Rather than tweaking the core if you need to use tags in adder you could
do this instead...

int(($Tag->weight/35)+0.5)*10

or if you really need to interpolate...

{'continue' => 1 }

...then another entry with the same shipmode, criteria and limits with:
f int(([weight]/35)+0.5)*10

> The version which works looks like this:
> heat	Heat Safe	weight	0	0	e Nothing to ship!
> {'adder' => "int(([weight]/35)+0.5)*10",'geo' => "zip",'ups' => "1",'zone'
> => "zone",'ui_ship_type' => "UPSI",'table' => "NextDayAir",}
> heat	Heat Safe Shipping	weight	0	150	u NextDayAir [value
> name=zip filter=digits default=45056]		{'PriceDivide' => "1",}
> heat	Heat Safe Shipping	weight	150	9999999	e Too heavy for UPS
> {'PriceDivide' => "1",}
> 
> What I tried was:
> heat	Heat Safe	weight	0	0	e Nothing to ship!
> {'adder' => "int((@@TOTAL@@/35)+0.5)*10",'geo' => "zip",'ups' => "1",'zone'
> => "zone",'ui_ship_type' => "UPSI",'table' => "NextDayAir",}

Heh, that definitely won't work.  I think you mistyped and meant to put:

heat	Heat Safe Shipping	weight	0	150	u NextDayAir [value name=zip
filter=digits default=45056]		{'adder' =>
"int((@@TOTAL@@/35)+0.5)*10",'geo' => "zip",'ups' => "1",'zone' =>
"zone",'ui_ship_type' => "UPSI",'table' => "NextDayAir",}


Peter