[ic] Solaris 10 install problems

Thu Dec 10 08:40:39 UTC 2009

>>________________________________________
>>From: Stefan Hornburg (Racke) <racke at linuxia.de>
>>To: interchange-users at icdevgroup.org
>>Sent: Wed, December 9, 2009 2:13:31 AM
>>Subject: Re: [ic] Solaris 10 install problems
>>
>>Josh Johnson wrote:
>>> 
>>> Josh Johnson wrote:
>>>> / 
>>> />/ I've been racking my brain on this one for 2 weeks now so I'm
looking />/ for some experts. Here's what I've tried.
>>> />/ />/ Solaris 10 x86
>>> />/ />/ perl 5.8.8 (solaris installed)
>>> />/ perl 5.8.4 from sunfreeware
>>> />/ perl 5.10.1 (compiled myself)
>>> />/ />/ using gcc 3.4.6
>>> />/ />/ I install the CPAN Bundle::Interchange as well.
>>> />/ />/ I can compile interchange and install it just fine. Run makecat
and />/ build the catalog etc etc just fine. I start up interchange and it
/>/ appears to start ok but when I try to to the admin interface (or />/
customer) I
>>>  get
>>> />/ />/ />/      We're sorry, the Interchange server is unavailable...
>>> />/ />/ />/ So I try and run it in DEBUG mode and I get this.
>>> />/ # bin/interchange --DEBUG=1
>>> />/ />/ ##### DEBUG MODE, running in foreground #####
>>> />/ Low traffic settings.
>>> />/ Calling UI......UI is loaded...
>>> />/ Interchange V5.6.2
>>> />/ Running with old signals.
>>> />/ Configuring catalog rubs...Using PostgreSQL, />/
DSN=dbi:Pg:dbname=rubsdb;host=192.168.1.205...done.
>>> />/ Interchange server started (22742) (UNIX)
>>> />/ Interchange server started in UNIX mode(s) (process id 22742)
>>> />/ Running in foreground, OS=solaris, debug=1
>>> />/ />/ Importing ichelp table from />/
/d00/rubs/htdocs/interchange/catalogs/rubs/products/ichelp.txt
>>> />/ Died in
>>>  server spawn: ichelp import into  failed: sdbm store returned />/ -1,
errno 22, key "kaccess.main" at />/
/d00/rubs/htdocs/interchange/lib/Vend/Table/Common.pm line 513, <IN> line 3.
>>> />/ /
>>> Please compile your Perl with GDBM support. First step is to install
>>> the GDBM development libraries on your system.
>>> 
>>> Regards
>>>     Racke
>>> 
>>> I believe it already is compiled with GDBM support, the libraries are
there as well. See output from perl -V
>>> 
>>>  ld='gcc', ldflags =' -L/usr/local/lib '
>>>    libpth=/usr/local/lib /usr/lib /usr/ccs/lib /opt/csw/lib /usr/sfw/lib
/opt/csw/bdb44/lib
>>>    libs=-lsocket -lnsl -ldl -lm -lc -lgdbm -lcrypt -ldb
>>>    perllibs=-lsocket -lnsl -ldl -lm -lc -lcrypt
>>> 
>>>Are you sure that this is the perl binary which runs Interchange?
>>>
>>>Regards
>>>       Racke
>>>
>>>-- LinuXia Systems => http://www.linuxia.de/
>>>Expert Interchange Consulting and System Administration
>>>ICDEVGROUP => http://www.icdevgroup.org/
>>>Interchange Development Team
>>
>Yes it's the perl that runs Interchange
>
># head interchange
>#!/d00/rubs/perl/bin/perl
>
>eval 'exec /d00/rubs/perl/bin/perl  -S $0 ${1+"$@"}'
>    if 0; # not running under some shell
>

>
># /d00/rubs/perl/bin/perl -V
>Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
>
>  Platform:
>   osname=solaris, osvers=2.10, archname=i86pc-solaris
>   uname='sunos jjsbest 5.10 generic_137112-08 i86pc i386 i86pc '
>   config_args=''
>    hint=previous, useposix=true, d_sigaction=define
>    useithreads=undef, usemultiplicity=undef
>    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
>    use64bitint=undef, use64bitall=undef, uselongdouble=undef
>    usemymalloc=n, bincompat5005=undef
>  Compiler:
>    cc='gcc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 ->DPERL_USE_SAFE_PUTENV
-DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV',
>    optimize='-O',
>    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV
-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV
-DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV'
>    ccversion='', gccversion='3.4.6', gccosandvers='solaris2.10'
>    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
>    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
>    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
>    alignbytes=4, prototype=define
>  Linker and Libraries: 
>    ld='gcc', ldflags =' -L/usr/local/lib '
>    libpth=/usr/local/lib /usr/lib /usr/ccs/lib /opt/csw/lib /usr/sfw/lib
/opt/csw/bdb44/lib
>    libs=-lsocket -lnsl -ldl -lm -lc -lgdbm -lcrypt -ldb
>    perllibs=-lsocket -lnsl -ldl -lm -lc -lcrypt
>    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
>    gnulibc_version=''
>  Dynamic Linking:
>    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
>    cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
>
>
>Characteristics of this binary (from libperl):
>  Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
>                        PERL_USE_SAFE_PUTENV USE_LARGE_FILES USE_PERLIO
>  Built under solaris
>  Compiled at Dec  7 2009 19:07:15
>  @INC:
>    /d00/rubs/perl/lib/5.10.1/i86pc-solaris
>    /d00/rubs/perl/lib/5.10.1
>    /d00/rubs/perl/lib/site_perl/5.10.1/i86pc-solaris
>    /d00/rubs/perl/lib/site_perl/5.10.1

1) Your installation is a pretty much out of the box 'standard' catalog
install or did you make any changes to the basics?
2) The following command does not return an error?  /d00/rubs/perl/bin/perl
-MGDBM_File -e 1

Ps. Please try to reply with an e-mail as text/plain ... Else it goes
through moderation each time and that takes a while to be processed.