[Date Prev][Date Next][Thread Prev][Thread Next][Minivend by date
][Minivend by thread
]
RE: [ic] Install Problem
Do a
ps -aux | grep interchange
and confirm interchange is running as interch. If not, you will need to
chown construct to that user.
If you don't see interchange, you have other problems.
You don't need to mess with the source files, your concern should be with
the construct in the cgi-bin.
Good luck,
Cameron
-----Original Message-----
From: interchange-users-admin@minivend.com
[mailto:interchange-users-admin@minivend.com]On Behalf Of Tom Compton
Sent: Friday, October 13, 2000 5:48 PM
To: interchange-users@minivend.com
Subject: Re: [ic] Install Problem
Thanks for the comment.
Located vlink and changed to:
[-rwsr-xr-x 1 interch interch 7732 Oct 9 11:41 tlink
-rw-r--r-- 1 root root 12364 Oct 9 11:41 tlink.c
-rwsr-xr-x 1 interch interch 7732 Oct 9 11:41
tlink.localhost.7786
-rw-r--r-- 1 root root 4232 Oct 9 11:41 tlink.pl
-rwsr-xr-x 1 interch interch 7316 Oct 9 11:41 vlink
-rwsr-xr-x 1 interch interch 7316 Oct 9 11:41
vlink._var_run_interchange_socket
-rw-r--r-- 1 root root 10889 Oct 9 11:41 vlink.c
-rw-r--r-- 1 root root 3709 Oct 9 11:41 vlink.pl
Tried several changes to construct and this is how it is now (in
cgi-bin directory):
-rwsr-xr-x 1 interch interch 7316 Oct 9 11:48 construct
I still recieve the error message "We're sorry . . . "
----- Original Message -----
From: Cameron B. Prince <cameron@akopia.com>
To: <interchange-users@minivend.com>
Sent: Friday, October 13, 2000 6:09 PM
Subject: RE: [ic] Install Problem
> Hi Tom,
>
> Find your vlink program. This is usually either the same name as the
catalog
> in a script-aliased directory, or catalog-name.cgi.
>
> This program needs to be chmod 4755 and chowned to interch:interch
or
> whatever user interchange is running as.
>
> Your error means the script ran, but couldn't communicate with the
> interchange daemon. This is almost always caused by permissions.
>
> Here's the site for construct something demo space 3:
>
> http://demo.Akopia.com/~construct/construct.cgi
>
> total 13
> drwxr-xr-x 4 construc construc 1024 Oct 12 16:32 .
> drwxr-xr-x 9 construc construc 1024 Oct 12 15:43 ..
> drwxr-xr-x 3 construc construc 1024 Oct 12 15:43 akopia
> drwxr-xr-x 3 construc construc 1024 Oct 12 15:43 construct
> -rwsr-xr-x 1 construc construc 7348 Oct 12 15:43
construct.cgi
>
> Notice the: -rwsr-xr-x on construct.cgi
>
>
> Good luck,
>
> Cameron
>
>
> -----Original Message-----
> From: interchange-users-admin@minivend.com
> [mailto:interchange-users-admin@minivend.com]On Behalf Of Tom
Compton
> Sent: Friday, October 13, 2000 4:39 PM
> To: Interchange-users@minivend.com
> Subject: [ic] Install Problem
>
>
> I recently installed interchange-4.5.7-1.rh6.i386.rpm. Interchange
> starts and runs. construct starts, runs, and gives the following
> message:
>
> "We're sorry, the Interchange server is unavailable...
> We are out of service or may be experiencing high system demand,
> please try again soon."
>
> The FAQ says this is the result of permissions problems.
>
> Both programs are running. Permissions on all the files seem fine
by
> me. I don't understand how the programs communicate, so I don't
know
> where to look for the problem.
>
> Any help would be appreciated.
>
> Thanks.
>
> Tom Compton
>
>
>
>
>
>
>
> _______________________________________________
> Interchange-users mailing list
> Interchange-users@www.minivend.com
> http://www.minivend.com/mailman/listinfo/interchange-users
>
>
> _______________________________________________
> Interchange-users mailing list
> Interchange-users@www.minivend.com
> http://www.minivend.com/mailman/listinfo/interchange-users
>
_______________________________________________
Interchange-users mailing list
Interchange-users@www.minivend.com
http://www.minivend.com/mailman/listinfo/interchange-users
_______________________________________________
Interchange-users mailing list
Interchange-users@www.minivend.com
http://www.minivend.com/mailman/listinfo/interchange-users
